Table of Contents
Advertisement
6.29 Activate Fuel value in GPRS data
GPRS data string has no fuel value by default, if you need the fuel value in GPRS
data string, please configure it as following:
SMS command: protocol+password 18
Tracker response: protocol 18 ok
Example: protocol123456 18
If you want to change back to the default data string, please configure as
following:
SMS command: protocol+password 12
Tracker response: protocol 12 ok
Example: protocol123456 12
Note: By default, tracker is connected to tracker.baanool.net:8090 with fuel value,
so no need to configure this step. If you are using another IP or domain name, use
this command to activate the fuel value.
6.30 Configure SMS monitoring center number
SMS command: centernum+password+space+phone number
Tracker response: centernum ok
Example: centernum123456 13322221111
After the SMS monitoring center number is set successfully, the "Continuous
interval tracking" messages will be sent to this number. If the monitoring center
number needs to receive the alarm notification message, please set this number as
an authorized number too.
Cancel SMS monitoring center number
SMS command: nocenternum+password
Tracker response: nocenternum ok
Example: nocenternum123456
6.31 Configure heartbeat package interval
The default heartbeat interval to keep GPRS connection alive is 100 seconds; you
can change it if necessary, but please be kindly informed that if the time interval
is too long, it may cause GPRS disconnection.
35
Hide quick links:
Advertisement
Table of Contents
