Configure Domain Name And Port - GPS Tracker 403 User Manual

Please configure it according to following steps.
6.28.1.1 Configure APN setting
APN is an abbreviation for Access Point Name and changes
depending on which mobile network you are using. For more
information about your local APN, please check with your local
wireless carrier.
SMS command: APN+password+space+local APN
Tracker response: APN OK
Example: APN123456 CMNET
Note: 123456 is tracker's default password, you can change the
password on App or refers to section 6.1.
6.28.1.2 Configure user name and password
In the most countries, the user name and password of GPRS are not
necessary; therefore, you can ignore this step if it is not necessary for
your local network. For those countries requiring user name and
password, please configure as following:
SMS command: up+password+space+user+space+password
Tracker response: user, password ok!
Example: up123456 Jonnes 666666
Note: 123456 means the password of the device, Jonnes means the
user name of gprs, and 666666 means password of gprs, please
configure it according to the user name and password of your local
ones, you can check this information with your local wireless carrier.

6.28.2 Configure domain name and port

Tracker connects to tracker.baanool.net:8090 by default. If you need to connect to
another domain name, please configure it.
SMS command: dns+password+space+DNS domain name+space+port
Tracker response: dns success!
Example 1: dns123456 04.GPSTrackerXY.com 9000
Example 2: dns123456 tracker.baanool.net 8090
33