26
Send command:"gprs+password,1,1" switch to UDP mode.
6.34 Configure parameters by USB
Connect the gps tracker to computer with the optional USB cable, find gps
tracker's internal memory and open serial debugging tool
in
the format of text, edit the commands according to the tips. .
Note: Filling password correctly is required to configure parameters by USB
successfully.
6.35 GPRS setting
User must send SMS via cell phone to set up IP, port and APN before starting
GPRS.
6.35.1 Setting up APN
APN standards for Access Point Name and differs from country to
6.35.1.1
country. For more information about the local APN, inquire with your local
GPRS network operator.
Text the tracker a SMS "APN+password + Space + your local APN" via
6.35.1.2
a cell phone and if setup successfully, the tracker will return the message "APN
OK".
e.g. send SMS command "APN123456 CMNET". If succeeded, "APN
6.35.1.3
OK" is returned by the tracker in SMS.