Alarm Function In Arming State; Door Opening Alarm; Acc (Ignition / Voltage) Alarm; Acceleration Sensor Alarm - GPS Tracker 403 User Manual

Table of Contents

Example: disarm123456

After disarming, the door, shock sensor and ACC alarm will be deactivated, and

these alarms won't be triggered any more.

6.20.2 Disarming with remote control (For B model)

Press

on for 0.5 second, tracker will enter into disarming state, siren beeps

two times, no SMS message notification.

6.21 Alarm function in arming state

When the door is opened in arming state, tracker will send SMS notification

"Door alarm+latitude & longitude" to authorized numbers every 3 minutes. The

siren will beep for 20 seconds, and if the door is still open, then the siren will

beep for another 20 seconds with 20 seconds pause, disarming to quit the alarm.

Tracker will send "ACC alarm + latitude / longitude" to authorized numbers

every 3 minutes if the ignition of the vehicle has been switched "ON" (Key is

rotated to "ACC ON" position when tracker works in arming state. The siren will

beep for 20 seconds, and if the ignition is still on, then the siren will beep for

another 20 seconds with 20 seconds pause, disarming to quite the alarm.

There is a built-in three axis acceleration sensor in the tracker to detect the

movement, tilt and shock when in arming state and tracker will send "Sensor

alarm + latitude / longitude" to authorized numbers, and only one message in 3

minutes when tracker works in SMS mode. Siren will beep for 5 seconds for the

first trigger and second trigger, and then beep 10 seconds for another trigger,

disarming to quit the alarm.

Sensor's sensitivity configuration

Table of Contents

Show Quick Links

Table of Contents