Terminal (Local) Time Setting; Reset Hardware; Configure Parameters By Usb; Gprs Configuration - GPS Tracker GPS104 Instruction Manual

5.23 Terminal (local) Time Setting

Send SMS "time+space+zone+password+space+local time zone", it will reply " time
ok!" after execute the command.
For example, Send SMS "time zone123456 8" (time zone of China).
If the local time zone is negative as "-8", then it should set as SMS:
"time zone123456 -8".

5.24 Reset Hardware

Send SMS "reset+password" to tracker device to reset the GSM module and
GPS module of the tracker device, it will reply "reset ok".

5.25 Configure parameters by USB

Find the USB cable in the package to connect tracker with computer, open the
memory of the tracker, find and open the initial configuration file with
notepad
Note: Correct password is need every time you configure the tracker.

5.26 GPRS configuration

User must send SMS command via cell phone to set up APN, IP and port before
starting tracking by GPRS.
5.26.1 Configure APN
APN standards for Access Point Name and differs from country to country. For more
information about your local APN, please inquire with your local GPRS network
operator.
Send SMS command to tracker "APN+password+Space+your local APN" via a cell
phone and if executed, the tracker will reply "APN OK".
For example: Send SMS command "APN123456 CMNET". If executed, the tracker
will reply "APN OK".
Notes: 123456 refer to password of tracker and CMNET is the APN of Network
Operator of china (China mobile).
5.26.2 Configure user, password for GPRS login
In most countries, the user name and password involving GPRS login are not
, operate according the instructions.
16