GPS Tracker 403 User Manual
  1. Manuals
  2. Brands
  3. GPS Tracker Manuals
  4. GPS
  5. 403
  6. User manual

GPS Tracker 403 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

1
GPS Tracker User Manual
Preface
Thank you for purchasing the tracker. This manual shows how to operate the device smoothly
and correctly. Make sure to read this manual carefully before using this product. Please note
that specification and information are subject to changes without prior notice in this manual.
Any change will be integrated in the latest release. The manufacturer assumes no
responsibility for any errors or omissions in this document.

Advertisement

Table of Contents
loading

Related Manuals for GPS Tracker 403

Summary of Contents for GPS Tracker 403

  • Page 1 GPS Tracker User Manual Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual.

  • Page 2: Table Of Contents

    Contents Summary..........................4 Applications........................4 Hardware Description......................4 Specifications........................5 Start to use...........................5 Terminal installation.....................5 SIM card installation....................6 Turn on the device......................7 Device status light......................7 GPRS configuration for live real-time tracking............7 Mobile APP........................9 BAANOOL IOT’s Web Version.................13 Function details.........................
  • Page 3 6.16.4 SOS alarm......................25 6.16.5 Geo-fence......................25 6.16.6 Movement alarm....................26 6.16.7 Over speed alarm....................26 6.16.8 Fuel alarm......................27 6.17 Remote control function (For B model)..............27 6.18 Arming........................27 6.19 Silent Arming......................28 6.20 Disarming........................28 6.21 Alarm function in arming state.................. 29 6.21.1 Door opening alarm.....................29 6.21.2 ACC (Ignition / voltage) alarm................

  • Page 4: Summary

    1 Summary This product is based on the GSM / GPRS network and GPS satellite positioning system. It integrates anti-theft alarm, positioning, first aid and tracking functions in a brand new product which can locate and manage remote targets through SMS text messages, mobile app and web platform.

  • Page 5: Specifications

    4 Specifications Product name LTE wireless data terminal Model DIM. 9.6×5.3×1.8cm Weight Network GSM/GPRS/LTE (B1/B2/B3/B4/B5/B7/B8/B12/B17/B20/B40) Band (1900/1800/900/850 MHz) GPS sensitivity -165dBm GPS accuracy Cold status Time To First Fix Warm status 35s Hot status Applicable car 12V-24V power Battery Chargeable changeable 3.7V 350mAh Li-ion battery Storage Temp.

  • Page 6: Sim Card Installation

    Wiring Diagram  The pink wire can be connected to the original car alarm horn or the alarm horn purchased together.  Understand that the vehicle door trigger type is positive trigger or negative trigger. Connected to the green wire if it is positive trigger, and connected to the blue wire if it is negative trigger.

  • Page 7: Turn On The Device

    5.3 Turn on the device Connect the positive and negative (red and black) wires of the power supply to the 12V or 24V power supply of the car. Wait the device works normally After 1 minute of power-on, and then turn on the Backup battery switch. 5.4 Device status light Red light: Always on when charging, and turns off after being fully charged.
  • Page 8 5.5.1 Configure APN setting APN is an abbreviation for Access Point Name and changes depending on which mobile network you are using. For more information about your local APN, please check with your local wireless carrier. SMS command: APN+password+space+local APN Tracker response: APN OK Example: APN123456 CMNET Note: 123456 is the default password, please change password on APP or...

  • Page 9: Mobile App

    5.6 Mobile APP 5.6.1 Scan the QR code to download APP Google Play、App Store search “BAANOOL IoT” to download it. 5.6.2 Register 5.6.2.1 Open BAANOOL IoT, register a new account and login. Input phone number Input correct country code, otherwise, no way to get verification code Input the calculation result.
  • Page 10 5.6.2.2 Choose BAANOOL IoV to enter it. 5.6.3 Bind device Click “Me” “Device Management” “Add”, scan the QR CODE on the device or enter the IMEI manually to bind the device. Scan QR CODE or enter the IMEI number Click to add the device 5.6.4 Position 1.
  • Page 11 devices on the map, click the icon of the device to see the details including latitude & longtitude, speed, altitude, time, ACC status, door status, and alarm status, etc. and you can click “Navigate” to navigate you to that car. 2.
  • Page 12 Select a device Geo fence Click to check the Geo-fence Create a new Geo-fence 5.6.6 Device management After selected the device, click “Me” to management page to add device, change device’s information, delete settings, group management and sub-account management.

  • Page 13: Baanool Iot's Web Version

    5.7 BAANOOL IOT’s Web Version Account name and password are the same on mobile App and web version 5.7.1 Register Open http://www.baanool.net to register a new account.
  • Page 14 Click to register Enter IMEI, account, password, mobile phone No. (For forget password purpose) to finish the registration.
  • Page 15 5.7.2 Login Enter your account and password to login 5.7.3 Add device Device management Add device...

  • Page 16: Function Details

    Enter IMEI Device name Choose an icon for device Click to save it This device you just added is still offline If the device is always offline (Grey color), please make sure the SIM card subscribes the GPRS service, and have credit to surf the Internet, you can put the SIM card in the phone to test if it can surf the Internet.

  • Page 17: Authorization

    the tracker cannot recognize it. When reading this user manual, you will notice that we have used "+" and "space" between some words;"+" between two words means they should be written together as one word and "space" between two words means you should leave one character space between two words.

  • Page 18: Continuous Interval Tracking

    If you call it from authorized phone number, it will hang up and report a real-time location as below: When it lost fix to satellites, the message will include the last known GPS position and a LAC code of the updated position as well. 6.4 Continuous interval tracking 6.4.1 Limited times tracking at a time interval SMS command: fix030s600s005n+password...

  • Page 19: Unlimited Times Tracking At A Distance Interval

    6.4.3 Unlimited times tracking at a distance interval SMS command: Distance+password+space+distance value Tracker response: Distance ok Example: Distance123456 0050 Note: The distance unit is meter, and value must be 4 digits. 6.4.4 Smart tracking at both time and distance interval SMS command: fix030s600s***n+password+space+distance value Tracker response: It will update a position at 600 seconds interval when motionless, and update a position at 30 seconds when...

  • Page 20: Gps Drift Suppression

    6.6 GPS drift suppression This function is activated by default. SMS command to activate: suppress+password Tracker response: suppress drift ok Example: suppress123456 If you stop driving the vehicle, tracker will stop updating its position and keep sending the same latitude and longitude, and when start to driving, the latitude and longitude will update automatically again.

  • Page 21: Auto Answer

    6.9 Auto answer Track is the default mode for position. SMS command to switch to auto answer mode: monitor+password Tracker response: monitor ok! Example: monitor123456 Note: If there aren’t any authorized numbers set-up, it will auto answer for all the incoming calls, if there are authorized numbers set-up, it will auto answer the incoming calls from authorized numbers and reject all other phone numbers.

  • Page 22: Acc On/Off Alert

    number, which is 10086 in this example of China Mobile. Received and execute Send ye out to 10086 balance123456 10086 ye Mobile Tracker 10086(China mobile) Send balance back Forward balance message to mobile phone Received ye from number in the Received Balance message tracker and process 6.12 ACC ON/OFF Alert...

  • Page 23: Fuel Sensor Calibrating

    20KM/H. SMS command: noquickstop+password Tracker response: noquickstop OK Example: noquickstop123456 Remote immobilizing SMS command: stop+password Tracker response: Stop engine succeed Example: stop123456 Once the immobilize function has been executed, it will remain immobile until you send command to resume the fuel supply Remote fuel resume SMS command: resume+password Tracker response: Resume engine Succeed...

  • Page 24: Configure Times Of Alarm Sms

    6.15 Configure times of alarm SMS The times of the message of a continuous alarm can be configured. 3 times messages by default. SMS command: xtime+password+times value Tracker response: xtime ok! Example: xtime123456 005 (It means to send messages 5 times.) Note: The times value must be 3 digits.

  • Page 25: Blind Area Alarm

    6.16.3 Blind area alarm This feature is deactivated by default, tracker will send SMS notification “No gps+latitude & longtitude of the last know position.” to authorized numbers if lost fix to GPS satellites. SMS command to activate: gpssignal +password+space+on Tracker response: gpssignal on ok Example: gpssignal123456 on SMS command to deactivate: gpssignal +password+space+off Tracker response: gpssignal off ok...

  • Page 26: Movement Alarm

    Note: The first latitude & longitude is coordinate of the top left corner of the Geo-fence, and the second latitude & longitude is the coordinate of the bottom right corner. To configure the Geo-fence the tracker must fix to satellites and be stationery for about 3-10 minutes.

  • Page 27: Fuel Alarm

    6.16.8 Fuel alarm When the vehicle's fuel consumption exceeds the normal standard while the vehicle is running, or there is fuel leakage or fuel stealing when the vehicle is stopped, tracker will send "oil: ××%+latitude & longitude" to the authorized numbers every 3 minutes.

  • Page 28: Silent Arming

    enter into arming state too, and will reply “set up fail! pls close the door” 6.18.2 Arming with remote control (For B model) Press key for 0.5 seconds, the car enters into arming state and the siren will beep one time, no SMS message notification. If you leave the ignition on (The ACC is on the ON position), tracker cannot enter into arming state, and siren doesn’t sound.

  • Page 29: Alarm Function In Arming State

    Example: disarm123456 After disarming, the door, shock sensor and ACC alarm will be deactivated, and these alarms won’t be triggered any more. 6.20.2 Disarming with remote control (For B model) Press on for 0.5 second, tracker will enter into disarming state, siren beeps two times, no SMS message notification.

  • Page 30: No Gsm Network Alarm

    There are three different levels. First level: Alarm will be triggered by slight vibration. SMS command: sensitivity+password+space+1 . Tracker response: sensitivity ok Example: sensitivity123456 1 Second level: Alarm will be triggered by medium vibration. SMS command: sensitivity+password+space+2 Tracker response: sensitivity ok Example: sensitivity123456 2 Third level: Alarm will be triggered by severe vibration.

  • Page 31: Check Status

    6.22.2 No sleep mode SMS command: sleep+password+space+off Tracker response: sleep off ok Example: sleep123456 off Tracker does not sleep, GSM and GPS work at all times. (Default mode) 6.23 Check Status SMS command: check+password Tracker response: Power: ON/OFF Battery: 100% GPRS: ON/OFF GPS: OK/NO GPS ACC: OFF/ON...

  • Page 32: Reset Hardware

    SMS command: time+space+zone+password+space+time zone value Tracker responds: time ok Example: time zone123456 8 Note: 8 is the time zone of China, If your country time zone is minus, write the time zone value with a “-“ symbol, for example, time zone123456 -8. 6.26 Reset Hardware This command will reboot the GSM and GPS modules of the tracker.

  • Page 33: Configure Domain Name And Port

    Please configure it according to following steps. 6.28.1.1 Configure APN setting APN is an abbreviation for Access Point Name and changes depending on which mobile network you are using. For more information about your local APN, please check with your local wireless carrier.

  • Page 34: Gprs / Sms Mode Switch

    Note: 123456 is tracker’s password, 04.GPSTrackerXY.com is the DNS, 9000 is port. If you want to configure IP instead of DNS, then please send SMS command: “adminip+password+space+IP+space+port” 6.28.3 GPRS / SMS mode switch The GPRS mode is the default one, if you need to switch, pls refers to the following instructions.

  • Page 35: Activate Fuel Value In Gprs Data

    6.29 Activate Fuel value in GPRS data GPRS data string has no fuel value by default, if you need the fuel value in GPRS data string, please configure it as following: SMS command: protocol+password 18 Tracker response: protocol 18 ok Example: protocol123456 18 If you want to change back to the default data string, please configure as following:...

  • Page 36: Initialization

    SMS command: heartbeat+password+space+time interval Tracker response: heartbeat ok Example: heartbeat123456 120 Note: (123456 means tracker’s password, 120 means the interval. The minimum interval is 60 seconds, and tracker will continue to send heartbeat every 60 seconds if you configure it less than 60 seconds. 6.32 Initialization If the tracker cannot work properly, you can send command to initialize it to return to default factory settings.

  • Page 37: Troubleshooting

    Please be sure to follow when using: 1. Keep the tracker used in a dry environment. The humid environment can easily damage internal circuits. 2. Please do not put it in a dusty environment. 3. Do not put the tracker in overheated or overcooled places. 4.
  • Page 38 Remote control Turn off tracker, and turn it on to program the remote control again. cannot be used This tracker drives the speaker output voltage DC12V/24V/1A, if it is Siren doesn’t work a negative trigger speaker, it will not be driven. Warranty Card IMEI: Distributor:...

Table of Contents