Table of Contents
Advertisement
GSM/GPRS/GPS TRACKER
MANUAL
U
Preface
Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly.
Make sure to read this manual carefully before using this product. Please note that specification and
information are subject to changes without prior notice in this manual. Any change will be integrated in the
latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.
1
Advertisement
Table of Contents
Related Manuals for GPS Tracker GPS102
Summary of Contents for GPS Tracker GPS102
- Page 1 GSM/GPRS/GPS TRACKER MANUAL Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the...
-
Page 2: Table Of Contents
Content 1. Summary ..............................3 2 Applications ..............................3 3 Hardware Description ..........................3 4 Specs................................4 5 Usage................................5 5.1 SIM card installation ..........................5 5.2 Battery and Charger ..........................5 5.3 Startup ..............................5 5.4 Initialization ............................. 6 5.5 Change the password .......................... -
Page 3: Summary
1. Summary Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet. 2 Applications Vehicle rental / Fleet management etc Powerful magnet + water proof, adsorbing in the hidden place of car for tracking secretly. ... -
Page 4: Specs
Built-in GSM/GPRS antennas Microphone 3.4 Bottom face is inside 3.5 Interior GSM Card Slot Install the battery like this 4 Specs. Content Specs. Dim. 64mm x 46mm x 17mm(1.8”*2.5”*0.65”) Weight Network GSM/GPRS Band 850/900/1800/1900Mhz GPS chip SIRF3 chip GPS sensitivity -159dBm GPS accuracy Cold status 45s... -
Page 5: Usage
5 Usage 5.1 SIM card installation Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in Text format, can’t be identified for PDU format. Steps: 5.1.1 Open the rear cover, and pick out the battery. 5.1.2 Push the foil up according the arrow on the foil and load the miscro SD card and push back. -
Page 6: Initialization
Turn on the unit outdoors by pressing the “on/off” button until the indicator is on. For first use, please initialize the unit and restore it to default setting. (Please refer to 5.4 for instruction.) In 10 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals. -
Page 7: Authorization
don’t need to enter “+” in sms, and “space” means press the spacebar button of the cell phone. 5.6 Authorization There are only 5 cell phone numbers able to be authorized, be sure to set the authorization phone number before use. 5.6.1 Call the tracker for 10 times continuously and get position correctly, then it will make the cell phone number as the authorized number automatically. -
Page 8: Auto Track
*Tracking location, when no GPS signal, the SMS includes the last valid latitude & longitude as well as the LAC code of current position, the LAC code can be input in the column of “manual track” menu of web platform. 5.8 Auto Track 5.8.1 Send SMS command “fix030s005n+password”... -
Page 9: Gps Drift Suppression
Nanshan district, Shenzhen, Guangdong, china. 5.10 GPS drift suppression 5.10.1 This function is deactivated as default, send "suppress+password" to tracker to activate, it will reply" suppress drift ok". The GPS data stop updating if vehicle is not moving and latitude and longitude always keep same, and GPS data updates automatically when vehicle is moving. -
Page 10: Data Logging
“monitor” mode. 5.12.4 Send SMS “tracker+password” to the unit, it will reply “tracker ok!” and restore to “track” mode. 5.13 Data logging 5.13.1 Auto logging：When the tracker devices lost GSM signals or fall offline from GPRS, tracker will store the tracking position and alerts automatically in the flash upon the pre-set condition, when GSM signals get back, all the event alerts will be auto-sent to the authorized numbers or monitoring platform (server), but the stored tracking data should be loaded to the monitoring platform via SMS command. -
Page 11: Shock Sensor Alarm
gprs” that means device does not work under GPRS mode. 5.14.2 Specified date Load： Send SMS: “load+ password+ space+ year month date” to tracker device, it will reply: “load ok” and load the tracking data to the monitoring platform upon the valid time you choose. -
Page 12: Movement Alert
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to the authorized numbers when it breaches the district. 5.16.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send SMS: “stockade+password+space+latitude,longitude;... -
Page 13: Sos Alert
5.19 SOS alert Press the SOS for 3 seconds, it will send “help me!+ Geo-info” to all the authorized numbers every 3 minutes. It will stop sending such a SMS when any authorized number reply SMS “help me!” to the tracker. 5.20 Low battery alert “lowbattery+password+space+on”, “low... -
Page 14: Sleep By Shock Sensor
5.22.2. Sleep by shock sensor Send "sleep+password+space+shock", tracker will reply "sleep shock ok", it will enter sleep mode if doesn’t detect any vibration, GPS module shut off, and LED will be off too. Vibration or any operations can awake it. 5.22.3 Deep Sleep by Shock Sensor Send "sleep+password+space+deepshock", tracker will reply "sleep deepshock ok"... -
Page 15: Forward The Third Parties' Message
5.23 Forward the third parties’ message 5.23.1 Send SMS "forward+password+space+third parties phone number" from authorized phone number, tracker will reply "forward ok", and supports 1 third parties phone numbers at most. For example, set the phone number of the service provider of the simcard in the tracker, when charge remind message coming in, tracker will forward it to authorized phone number. -
Page 16: Tcp/Udp Switch
If the local time zone is negative as “-8”, then it should set as SMS: “time zone123456 -8”. 5.28 TCP/UDP switch Command: "gprs+password,0,0" TCP with keep alive data, this is the default mode. Command: "gprs+password,0,1" UDP with keep alive data Command: "gprs+password,1,0"... -
Page 17: Less Gprs Traffic
and if succeeded in setup, the tracker will return the message “APN OK”. 5.31.1.3 e.g. send SMS command “APN123456 CMNET”. If succeeded, “APN OK” is returned by the tracker in SMS. Notes: 123456 refer to password of tracker and CMNET is the APN of China Mobile (One of GSM Operator in china). -
Page 18: Modes Switch Between "Sms" And "Gprs
5.32.2 Activate this function: Send "less gprs+password on", tracker will reply "less gprs on ok". 5.32.3 Deactivate this function: Send "less gprs+password off", tracker will reply" less gprs off ok". Note: 123456 is the password of tracker, and replace it with the new if you have changed. -
Page 19: Cautions
5.35.2 PC based installation tracking software included in the CD in package. 6 .Cautions Please comply with the instructions to extend the unit life: 6.1 Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry. 6.2 Don’t use &...