Related Manuals for GPS Tracker TK510
Summary of Contents for GPS Tracker TK510
- Page 1 GPS Vehicle Tracker (RFID + Camera) USER MANUAL (Model: TK510) Version 4.0 (Date: Jan.3, 2017)
-
Page 2: Table Of Contents
TK510 GPS Vehicle Tracker User Manual CONTENT Preface ..........................2 I. Features & Functions ..................... 3 II. How to Operate it ......................4 Authorize the Alarm-received Phone No..................4 Arm/Disarm by Phone Calling ..................... 4 Check the Vehicle’s Status ......................5 Arm/Disarm the System by SMS .................... -
Page 3: Preface
TK510 GPS Vehicle Tracker User Manual Preface TK510 GPS Vehicle tracker is the most advanced & cost-effective solution for vehicle security, real-time tracking & fleet management. It has the following unique functions: Camera for snapping & monitoring via MMS, email or platform;... -
Page 4: Features & Functions
I. Features & Functions 1. Industrial design with high performance ARM7 processor; 2. GPS tracker + RFID Car alarm with long-distance tag; 3. Active RFID Driver ID identification or Mifare1 IC card reading (optional) 4. Track on command or by time interval or by distance;... -
Page 5: How To Operate It
TK510 GPS Vehicle Tracker User Manual II. How to Operate it The default user password is 111111. If the user password is changed, user should send the SMS command with the new user password instead of 111111. XXX is the control code, all the letters must be capital letters or in small letters, command with mixed capital letter &... -
Page 6: Check The Vehicle's Status
TK510 GPS Vehicle Tracker User Manual Check the Vehicle’s Status SMS command: 111111CHK (or 111111chk) This instruction is used to inquiry the vehicle‟s location & system‟s status. The system will send back the SMS, includes the similar information, such as “Armed……”... -
Page 7: Check The Real Physical Address
TK510 GPS Vehicle Tracker User Manual Check the Real Physical Address SMS command: 111111ADD (or 111111add) When user sends this SMS command to the tracker, the tracker will automatically send back the car‟s real physical address (such as city name, street name) to your mobile by SMS.(it need server's support for address translation) -
Page 8: Restore Car From Being Stopped
TK510 GPS Vehicle Tracker User Manual This instruction is used to stop the car in safe condition. If the car's speed is higher than 30KM/h, the car is stopped gradually by impulse control, if the car's speed is lower than 30Km/h, the car is stopped immediately. -
Page 9: Speed Limiter
TK510 GPS Vehicle Tracker User Manual (For example: 111111SPD:120, if the car speed is over 120KM/H, it will send out warning alert by SMS/platform). 111111SPD:0 to disable the over-speed alert. It is the default setting. 111111SPD: to check the setting of over-speed alert. -
Page 10: Show The Sms Content In Languages
TK510 GPS Vehicle Tracker User Manual X: is time in minutes (default: X=180 minutes, maximum:65535 minutes) Example: 111111TIR:1:120, Show the SMS Content in Languages. SMS command: 111111LNG:X it is used to define the SMS content in different languages. X=0, English;... -
Page 11: Other Sms Command List
TK510 GPS Vehicle Tracker User Manual Crash alert Car door open alert(in3) Broken line alert (in2) Fuel loss alert Un-define Other SMS Command List Note: ****** is user‟s password and the default password is 111111. The tracker will only accept commands with the correct password. - Page 12 TK510 GPS Vehicle Tracker User Manual It is to set the initial odometer reading. (X: meters) 111111ODO: is to read the present odometer reading (with : at the end) ******SET:1:x,2:y,3:z,4:u 111111SET:1:888888,2:120,3:8,4:10 Set multiple parameters ,5:v,6:w, 00,5:50,6:2, Example: in above example: x=888888 is operation password, y=2 is over-speed, z=8 is time...
- Page 13 TK510 GPS Vehicle Tracker User Manual It is to set the hear-beat time interval. (in minutes) Pair wireless ******STD 111111STD immobilizer It is to pair the wireless immobilizer (optional functions) Check &set parameter ******SET: 111111SET: together The above command is used to check the parameters together. To set the parameter, please...
-
Page 14: The Setting For Gprs Connection
TK510 GPS Vehicle Tracker User Manual III. The Setting for GPRS Connection The GPRS setting is necessary for using the following 2 functions: (1) Check the car‟s real physical address by send 111111ADD (2) Online tracking service by web-based tracking platform SMS format: 111111WWW:IPN:X;COM:X;APN:apn,user,password;RPT:X;SLP:X;RUN:X;... -
Page 15: Snap Photo & Monitor Via Mms/Email/Platform
TK510 GPS Vehicle Tracker User Manual 111111WWW:RPT:X; This is to set the upload time interval. The unit is second, the minimum value is 10 seconds. The default setting is 60 Example: 111111WWW：RPT：60； (Upload time interval is every 60s) 111111WWW:RUN:X;... - Page 16 TK510 GPS Vehicle Tracker User Manual 111111MMS:SVR:X;PRX:Y;APN:Z;COM:N X: MMSC server URL; Y: The IP of MMS proxy Z: MMS_APN, user, Password. N: The Port of MMS proxy For more information about the MMS setting parameters of worldwide GSM operators, please search by Google or refer to this link: http://www.nowsms.com/mobile-operator.mmsc-settings...
-
Page 17: Rfid Car Alarm Functions And How To Use
TK510 GPS Vehicle Tracker User Manual SMS command: 111111BOX:Email (Example: 111111BOX:topten800@gmail.com ) RFID Car Alarm Functions and How to use It is the optional function, the extra RFID reader module & tag are needed. It supports 2 types of RFID reader: (1)2.4G long distance reader/reader module(3-8meters);... - Page 18 TK510 GPS Vehicle Tracker User Manual Activate/Deactivate RFID Function The following SMS commands are used to turn ON/ OFF the RFID function: 111111RFD:6:1 : Activate the RFID function (Default setting) 111111RFD:6:0 : Deactivate the RFID function Arm/Disarm by RFID Tag...
-
Page 19: Alarm Types
TK510 GPS Vehicle Tracker User Manual VI. Alarm Types Vibration Alarm In arming status, if the car is vibrated, it will send out alarm SMS. Power Failure Alarm In arming status, if the battery is cut off, it will send out alarm SMS. -
Page 20: Installation
TK510 GPS Vehicle Tracker User Manual VII. Installation PIN No. Color Usage Description Power +12VDC/24VDC. + Black Ground. - Input1 White Digital input, (negative triggering), SOS button Digital Input, (negative triggering), e.g. detecting Input2 White tamper of the wiring harness. - Page 21 TK510 GPS Vehicle Tracker User Manual 10 bits Resolution Analog Inputs. 0-5V DC detection , Blue connect with temperature/fuel sensor etc. 10 bits Resolution Analog Inputs. 0-5V DC detection , Blue connect with temperature/fuel sensor etc. Blue For optional use...
- Page 22 TK510 GPS Vehicle Tracker User Manual 111111EXT:1:0, Output1 Output 1 is connected with relay to stop the car, the wiring is as following: Output2 Output 2 is connected with siren for alarm, the wiring is as following: Output3 Output 3 is for optional use, the connection is same as outpu1/output2.
- Page 23 TK510 GPS Vehicle Tracker User Manual Activate the impulse output5, SMS command: 111111LCK1, Adjust the time T of impulse output4/output5, SMS command: 111111NUM:9:T, (T is the time, in seconds, default: 3 seconds) Installation Notes: We strongly recommend you to ask the professional car electrician to do the installation.
-
Page 24: Specifications
TK510 GPS Vehicle Tracker User Manual After installation, please test the system & make sure that it can GSM signal & GPS signal very well. Otherwise, fix the GSM antenna or GPS antenna at other places until the signals are OK. -
Page 25: Faqs & Troubleshooting
TK510 GPS Vehicle Tracker User Manual IX. FAQs & Troubleshooting Troubleshooting (1) The GSM SIM card has no credit; (2) The SIM card is protected by PIN code; I call the tracker, it does not ring (3) Check the power supply, if 2 LEDs flash;...