Iiii Gprs Communication Setting - GPS Tracker PST-AVL01 Installation And Operation Manual

IIII GPRS communication setting

step1: make sure that your SIM card in PST-AVL01 have the GPRS faction
Step2: Set the phone number of PST-AVL01 by send one SMS:
SMS Format: W******,010,tel
For example :
PST-AVL01 will response one SMS to check it.
"123" can be considered to be the device's name. (Tracker ID must be < 14 digits)
If there are several devices ,you can use their Tracker ID to differ from each other.
PST-AVL01will response one SMS to confirm the setting.
Like "set SIM OK/120"
Step3 : Set IP address and Port by send one SMS
SMS Format: W******,012,IP,PORT
For example :
W000000,012,202.116.11.12,8000
Make sure that the IP should be the Extranet IP. If your pc is in Intranet ,you must know your Extranet IP .
You can know your PORT from the router' s configuration.
Now there are two ways of getting your IP address and PORT:
First ,you can get your IP and port through the DOS Order: ipconfig .
Second , the IP address and PORT can be got from IT supports, such as some IT support websites..
FORMAT:
IP: xxx.xxx.xxx.xxx
PORT： [1,65536]
For example :W000000,012,202.116.11.12,8000
PST-AVL01 will response one SMS to check it.
Like "Set IP ok /202.116.11.12#8000"
Step4: Set APN
SMS format : W*****,011, APN
APN is your username when you use the GPRS function ,and it is used to be connected to the intenet.
For example :
W000000,011, CMNET
Step5: Enable GPRS function
SMS format:
W******,013,X
For example: W00000, 013, 1
PST-AVL01 will response one SMS to check it.
Like "set APN OK /CMNET"
( Note: 1 PST-AVL01 default value is GPRS Disable
2 SMS W0000,013,0
Step6 : According to GPP communication protocols of PST-AVL01, the server can analyses the GPRS
data.
Or According to NMEA V3 protocol , the server can analyses the GPRS data.
W000000,010,13866668888
is disable GPRS function )
Page 18 of 23