Siemens SIMATIC HMI Unified Comfort MTP700 Operating Instructions Manual page 105

Panel Information
● "Device type": HMI device type designation.
● "Image version": Version of the firmware and operating system.
Select storage media for OS update
Use the selection list to select the storage medium on which the firmware file is located.
Firmware files on external storage
● The list shows all firmware files that can be loaded into the HMI device.
Select the desired firmware master file (.fwf) from the list.
●
The HMI device restarts after the "Update OS" button is pressed. The loading process
then begins.
A dialog with a progress bar is displayed on the HMI device for each firmware file.
The HMI device is restarted again after the completion of the loading process.
The main window of the Control Panel is displayed after the restart. The operating system
on the HMI device is updated.
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA
"Update OS": Button for starting the loading process.
Operating the Control Panel
5.9 Service and Commissioning
105