Language, Region And Formats; Date And Time - Siemens SIMATIC HMI Unified Comfort MTP700 Operating Instructions Manual

5.8

Language, Region and Formats

5.8.1

Date and time

Under "Date and time", set the date, time, and time zone for the HMI device manually or via
a time server on the network.
NOTICE
Time synchronization required for time-dependent reactions
A malfunction may occur in the plant if the date and time are not synchronized and time-
dependent reactions are triggered in the plant via the HMI device. To avoid malfunctions,
use automatic time synchronization via one or more NTP servers.
Date and Time
● "Date": Display field with the current date.
● "Current time": Display field with the current clock time.
● "Time zone": Selection list for the desired time zone.
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA
Operating the Control Panel
5.8 Language, Region and Formats
101