Siemens SIMATIC HMI Unified Comfort MTP700 Operating Instructions Manual page 140

Technical information
8.2 Labels, certificates and approvals
EU Declarations of Conformity
The EU Declarations of Conformity are available to the relevant authorities at the following
address:
Siemens AG
Digital Industries
Factory Automation
DI FA AS SYS
Postfach 1963
D-92209 Amberg
You can download information on the EC Declaration of Conformity, here under the keyword
"Declaration of Conformity":
Unified Comfort Panels certificates
(https://support.industry.siemens.com/cs/ww/en/ps/26033/cert)
UL approval
Observe the following notes:
● The device shall be supplied from an isolating source.
● Only for use in LAN, not for connection to telecommunication circuits.
Underwriters Laboratories Inc., to
● UL 61010-2-201 (E116536)
● CSA C22.2 No. 61010-2-201
or
Underwriters Laboratories Inc., to
● UL 61010-2-201 (E222109)
● CSA C22.2 No. 61010-2-201
● ANSI/ISA 12.12.01 (Hazardous Location)
● CSA C22.2 No. 213 (Hazardous Location)
Approved for use in
● Class I, Division 2, Group A, B, C, D T4 or
● Class I, Zone 2, Group IIC T4 or
● non-hazardous locations
140
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA