Loading The Media - Toshiba B-FV4D-GL Series Owner's Manual

2. PRINTER SETUP

2.7 Loading the Media

WARNING!
1. Do not touch any moving
parts. To reduce the risk
WARNING!
of fingers, jewellery,
clothing, etc. being drawn
into the mechanism, be
WARNING!
sure to load the media
only once the printer has
completely stopped WARNING!
moving.
2. To avoid injury, be careful
not to trap your fingers
while opening or closing
the Top Cover.
CAUTION!
Be careful not to touch the
Print Head Elements when
opening the Top Cover. Doing
this may cause damage to
some of the dots through
static discharge or other print
quality problems.
ENGLISH VERSION EO1-33099
This section describes how to load the media in the printer. This printer is
intended for printing label (without liner) rolls. Please use TOSHIBA
TEC CORPORATION approved media.
NOTES:
1. The size of the media which can be loaded inside the printer is as
follows:
Outer roll diameter: Max. 127mm (5")
Inner core diameter: 40 (1.57") mm
2. Use the outside wound type media and load it so that the print side
faces up.
1. Open the Top Cover while pulling the Lock Release Portions as
indicated by the arrows.
Top Cover
E2- 7
2.8 Self Print Test and Dump Mode Utilities
Outside wound
Lock Release Portion