Installing A Condensate Neutralizer - IBC VX Series Installation & Operating Manual

5.
Ensure that the trap upper union nut is
secured by the outlet clip.

3.10 Installing a condensate neutralizer

If discharging condensate into building drain piping materials that are subject to corrosion, use a
neutralization package.
Caution
After installing a condensate neutralization package, the pH of the condensate discharge
must be measured on a regular schedule to ensure the neutralizing agent is active and
effective.
Danger
The water in the condensate neutralizer can cause severe burns to the skin. Wear
protective gloves and eye wear when servicing the condensate neutralizer.
3.10 Installing a condensate neutralizer
6.
Check that all trap fittings have been
hand-tightened to prevent leakage of flue
gases. Do not use tools and over-torque.
Check for leaks.
39