Installation & Commissioning Report
Model Number _____________________ Serial Number ________________________________
Date of Installation ________ Address of installation ____________________________________
User contact information __________________________________________________________
Installer Information (Company & Address)_____________________________________________
Phone/Fax/E-mail ________________________________________________________________
□
□
Fuel:
Natural Gas
Gas Supply Pressure (high fire) ____ Inches w.c. Measured Rate of Input (high fire) _____Btu/hr
□
Leak testing completed
□
System Cleaned and Flushed (type of cleaner used) __________________________________
□
System Filled (type/concentration of any glycol/chemicals used) _________________________
□
Air purge completed
□
Relief Valve correctly installed and piped Relief valve "try lever" test performed
□
Condensate trap filled Condensate drain clear and free flowing Condensate Neutralization.
□
Ignition Safety Shutoff test completed. Flame current reading - High fire _____ µA - Low fire _____
µA
□
Owner advised and instructed in the safe operation and maintenance of the boiler and system.
□
Information regarding the appliance and installation received and left with owner
Combustion Readings: CO
Flue temperature ___ Return water temperature (measure simultaneously with flue temp.) _____
Commissioning has been completed as listed on this report - Installer's Signature _____________
Installers: send this completed sheet - Fax to 604 877 0295 - or - scan and Email to info@ibcboiler.com.
Propane
□
□
Gas piping
Venting system
_____________ % O
2
2
Installation & Commissioning Report
□
□
Fan
combustion components
______________ % CO ____________ ppm
105