Table of Contents
Advertisement
DuraStor 6220SS/6200SR/312R Installation and User's Guide
Mounting the Storage Enclosure on the Rack
The DuraStor 312R storage enclosure can be installed into any
standard 19-inch rack.
Installation tips: It will be helpful to have someone assist you.
Also, make sure that the mounting hardware is easily accessible
before you begin the installation.
Note: If you are not installing your storage enclosure into a
rack, skip to
1 Remove the PSUs. (See
page
5-10.)
Warning: The PSUs must be removed prior to installing the
RAID appliance into the rack. The added weight of the
PSUs could damage the RAID appliance chassis during
installation. See
for detailed instructions.
2 Select a location within your rack.
If you are installing the DuraStor 6220SS, consider the placement
in relation to the DuraStor 6200SR RAID appliance and ensure
that there will be adequate airflow for the front-to-side and side-
to-side areas.
3 Place the DuraStor 312R storage enclosure in the desired
position in the rack.
4 Secure the left and right front chassis ears to the rack's front
vertical members using the supplied screws and nuts. (See
Figure
3-7.)
3-8
Connecting the Power Cords on page
Replacing a Power Supply Unit on
Replacing a Power Supply Unit on page 5-5
3-11.
Advertisement
Table of Contents
