Table of Contents
Advertisement
The DuraStor 6200SR PSU is shown in
Power-on LED
On/Off Switch
Figure 2-5. DuraStor 6200SR Power Supply Unit
You access the PSUs by removing the front bezel, and turn them on
by using their On/Off switches. When you turn on a PSU, its own
Power-on LED and the Power LED on the front bezel light up, and
the DuraStor 6200SR RAID appliance performs a power-on self-test
(POST), which can be monitored via the LCD panel on the OCP.
Figure 2-6
shows the AC power cord connectors on the back of the
chassis. The security bales hold the power cords in place and
prevent accidental disconnections.
AC Power Cord Connectors (with Security Bales)
Figure 2-6. DuraStor 6200SR Power Cord Connector Location
About the DuraStor Storage Subsystem
Figure
2-5.
PSU Latch Release
2-5
Advertisement
Table of Contents
