DuraStor 6220SS/6200SR/312R Installation and User's Guide
Drive Status LEDs
The Drive Status LED indicates the status of the corresponding
disk drive. (See
Drive Activity LEDs
The Drive Activity LED flashes to indicate I/O activity on the
corresponding disk drive.
Table 4-4
explains how to interpret the Drive LEDs.
Table 4-4. Drive LEDs
Drive Status LED
Solid green
Flashing green
Solid green
Flashing green
Flashing green
Flashing amber
Solid amber
Solid amber
Off
Flashing amber
Solid green
Solid amber
Solid amber
Alternating
amber and
green
4-6
Table
4-4.)
Drive Activity
LED
Solid green
Solid green
Solid green
Solid green
Solid amber
Solid amber
Solid amber
Solid amber
N/A
Solid amber
Status
Powering on.
Drive ready, not assigned to
an array.
Drive ready, assigned to an
array.
Hot spare ready, assigned to
an array.
Drive error—Fault, not
assigned to an array.
Drive error—Fault, assigned
to an array.
Array critical, remaining
good drive LEDs.
Hot spare, rebuild mode (all
Drive Status LEDs).
Empty drive slot.
Drive manually disabled
(applies to LVD-LVD only).
Array is fault-tolerant.
Array is in rebuild mode.
Array has a failed drive.
Firmware checksum error.