Table of Contents
Advertisement
The DuraStor 312R storage enclosure is compliant with version 1.0
of the SAF-TE specification. Under this specification, your external
RAID storage system is implemented as a fixed SCSI target ID,
allowing standard alert detection and status reporting with the
SCSI bus as the underlying transport mechanism.
When used in conjunction with storage management applications
such as Storage Manager Pro or Disk Array Administrator, the
DuraStor 312R can alert users or administrators to conditions
requiring their attention. These alerts are in addition to the LEDs
and audible alarms that are part of the DuraStor 312R storage
enclosure.
Drive ID Settings
RS-232
Figure 2-18. DuraStor 312R SAF-TE Switches
The SAF-TE controller card sets the drive configuration. It has eight
switches that control many settings.
Note: By default, SAF-TE switches 1 through 6 are set to
their
DOWN
set to their
Table 2-2
describes the function and use of each switch.
SAF-TE CONTROLLER
D
B
1 2 3 4 5 6 7 8
(0) position and SAF-TE switches 7 and 8 are
(1) position.
UP
About the DuraStor Storage Subsystem
S
A
A
S
S
D
R
0
1
0
1
2
L
M
Position = 1
UP
Position = 0
DOWN
2-17
Advertisement
Table of Contents
