Table of Contents
Advertisement
DuraStor 6220SS/6200SR/312R Installation and User's Guide
Note: Host 1 In (CH 3), Host 2 In (CH 0), Disk CH 2, and
Disk CH 1 ports require external termination when they
are unused in any dual-controller (active-active or active-
passive) configuration. The single-controller (stand-alone)
configuration requires no external terminators.
Host Out (CH 3) and Host Out (CH 0) have automatic
internal termination when they are unused.
The switch in the lower right corner of the panel sets the
keyboard/keypad input control to either
OCP) or
(external, via the VT-100 keyboard or a computer
EXT
running Hyper Terminal). Setting the switch to
OCP buttons.
Note: The front bezel LEDs will work whether the OCP is
being used or not. Setting this switch to
the front bezel LEDs.
Table 2-1
summarizes the specific technical features of the
DuraStor 6200SR RAID appliance.
2-8
(internal, via the
INT
disables the
EXT
will not disable
EXT
Advertisement
Table of Contents
