Setting Up The Durastor 6200Sr Raid Appliance; Removing The Front Bezel - Adaptec DuraStor 6200SR Installation And User Manual

Setting Up the DuraStor 6200SR RAID
Appliance
This section describes how to install and set up your
DuraStor 6200SR RAID appliance.

Removing the Front Bezel

1 Unlock the front bezel by turning the thumb screws one-quarter
turn to the left. (See
Figure 3-1. Unlocking the Front Bezel
2 Using both hands, pull the front bezel from the appliance. (See
Figure 3-2.)
Figure 3-2. Removing the front bezel
Installing the DuraStor Storage Subsystem
Figure 3-1.)
3-3