Microlife WatchBP Office Vascular Instruction Manual page 7

Set the Hide function - The device features a Hide function to prevent influence of
blood pressure in patients due to nervousness triggered by visible blood pressure
measurements. Prese
function is ON it means that the BP values will not be displayed during the blood pressure
measurement. Use the
finished the setting mode the current time is displayed.
* The "highest inflation pressure" can be programmed to the device. The suggested Inflation Pressure is 30 to 40 mmHg
above the expected systolic value of the patient. You can select 160, 180, 200, 220 or, 240mmHg or use the default
(device Displays "- - -') then the device will automatically inflate the cuff to the optimal cuff pressure. If the selected
Highest Inflation Pressure selected is too low to measure a patient's blood pressure it may result in re-pumping or an
error ("Err ") will be shown.
The date and time on the device automatically synchronizes with the date and time on the computer when connected
*
with the WatchBP Analyzer.
button to switch ON or OFF the Hide Function. If the Hide
or
button to confirm and finish the settings. Once you have
WatchBP Office
7
EN