Using A Power Adapter; Safety, Care, Accuracy Test And Disposal; Safety And Protection - Microlife WatchBP Office Vascular Instruction Manual

Using a power adapter

Only use the Mains Adapter supplied with the
device to recharge the device.
1) Plug the adapter cable into the power
socket of the device.
2) Plug the adapter plug into the wall socket.
The battery will be recharged if the device
is attached to an AC power source. After
the battery is fully recharged, the charging
will stop. No battery power will be used if
the adapter is plugged in. The battery must
always remain within the device even when
using AC power.
3) If the battery starts losing capacity, contact
your local dealer for replacement battery.
The battery can be replaced.
* The External Power icon always shows on LCD display when
the adapter is used.

Safety, care, accuracy test and disposal

Safety and protection

This device may only be used for the purposes as described in these instructions. The
device comprises of sensitive components and must be treated with caution. The
manufacturer cannot be held liable for damage caused by incorrect application.
Follow the Instructions for Use. This document provides important product operation and safety information
regarding this Blood Pressure Monitor. Please read this document thoroughly before using the device and keep for
future reference.
• Only activate the pump when the cuff is connected to the device.
• Do not use the device if you think it is damaged or if anything appears unusual.
• Read the further safety instructions in the individual sections of the instruction manual.
16
DC 7.5V 1.5A
DC 7.5V 1.5A
Mode button to select the mode