Taking Measurement Simultaneously In One Arm & One Ankle - Microlife WatchBP Office Vascular Instruction Manual

WatchBP Office
Taking measurement simultaneously in one Arm & one ankle (for ABI or baPWV
assessment)
When standby with one Arm & one ankle measurement selected, press the button
to start a measurement. The device automated takes two consecutive measurements
with 60 seconds resting time and 60 seconds interval time. The device shows the setting
of Height and then starts counting down 60 seconds Resting Time before the first
measurement. During the measurement, the cuff pressure is held at around 60 mmHg
for around 10 seconds to collect sufficient pulse waves. The average measurement
reading is displayed and saved after the measurements are complete.
* The value in left lower corner will switch between ABI/ Pulse Rate and Height/ baPWV.
13
EN