Before Using Watchbp Office; Selecting And Fitting The Correct Cuff - Microlife WatchBP office Instruction Manual

Simultaneous dual-arm measurement and auscultatory function for accurate office blood pressure measurement
Hide thumbs Also See for WatchBP office:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1

Before using WatchBP Office

Selecting the correct cuff
Two different cuff sizes are provided with the
WatchBP Office: Medium and Large. Select the cuff
size that best matches the circumference of the
patient's upper arm.
M (Medium size)
22 - 32 cm (8.75 - 12.5 inches)
M is the correct size for most people.
L (Large size)
32-42 cm (12.5-16.5 inches)
Connect the cuff to the device by inserting the cuff
connector into the cuff connector socket.
10
Fitting the cuff properly
1) Place the cuff over the left (right) upper arm so
that the air tube and artery mark arrow point
toward the lower arm.
2) Lay the cuff on the arm. Make sure that the lower
edge of the cuff lies approximately ¾" to 1"(2 to
3cm) above the elbow.
2–3cm

Advertisement

Table of Contents
loading

Table of Contents