Table of Contents
Advertisement
The Right Pane – Information View
To the right of the component tree is the Information View pane.
This area displays information related to the currently selected item
in the tree. The specific information displayed in the Information
View varies depending on the item selected. When there are
separate types of information available for the selected item, the
Information View is separated into tab pages. Tab pages are
generally information or configuration parameters that are related
to the selected item.
To select a specific tab page within the Information View, press
Alt+highlighted letter on the tab. For example, to change to a
controller's Configuration tab, press Alt+C. You can also press the
Tab key when in the Tree View to move over to the currently
displayed Information View tab page. On a tab page within the
Information View, you can move between the items with the Tab or
Shift+Tab keys. See
details on changing between the Tree View and Information View,
using the menu bar, and navigating within the SMOR interface.
Within the Information View, select an item to configure by using
the Tab or Shift+Tab keys to move the highlight to the item. Items
that cannot be selected are shown in black. The way in which you
change an item depends on the type of control associated with the
item. Checkboxes are toggled by using the Spacebar. List-box items
(for example, Transfer Rate) are changed using the up and down
arrow keys. List box items can be recognized by the downward
pointing arrow at the right of the item.
To exit the Information View and return to the Tree View, press Esc.
If you have changed the configuration, save changes if desired by
using
Tab key to select Yes or No and then pressing Enter.
the
Note: The items and settings shown in the Information View
vary depending on the type of controller, device, or array
selected in the Tree View.
Keyboard Reference on page 2-3
Storage Manager on ROM
for additional
2-8
Advertisement
Table of Contents
