Table of Contents
Advertisement
The Information tab for a controller displays general information
reported by that controller. Fields may have special conditions:
Model
Serial #
NVRAM Ver.
Cache
Revision
FW Type
ECC
SCSI/ATA Bus
Width
Buses
SCSI ID
Transfer
Host Bus
Bus Type
Transfer
Attached
Modules
Note: Adaptec RAID controllers having replaceable RAM
report a cache size 16 MB less than the total installed
memory value because the controller uses the first 16 MB as
processor RAM. Embedded RAM controllers will report the
amount of cache RAM available.
Controller model number
Controller serial number
Version number for NVRAM settings
Amount of installed cache memory
Controller firmware revision
Firmware type
Yes if Error Correction Code (ECC) memory is
installed
Bus width: 8-bit (Narrow) or 16-bit (Wide)
Number of buses on the controller
SCSI ID assigned to controller (SCSI only)
Maximum possible transfer rate
PCI 32-bit or Adaptec 2400A/2100S
PCI 64-bit for Adaptec 2000S/2005S/2110S/3200S/
3210S/3400S/3410S
Host PCI transfer rate:
132 MB/sec for Adaptec 2400A
132 MB/sec for Adaptec 2100S
264 MB/sec for Adaptec 3200S/3400S
528 MB/sec for Adaptec 2000S/2005S/2110S/
3210S/3410S
Memory modules are reported as Bank x: xxMB
ECC, starting with Bank 0. ECC is displayed only
when ECC memory is installed.
Storage Manager on ROM
2-14
Advertisement
Table of Contents
