Table of Contents
Advertisement
On the left side of the window are the associated logical devices as
seen by the host computer.
Storage Manager displays the same icon for non-hard-drive devices
in both logical and physical views. Hard drives appear either as
individual drives or as members of arrays. In either case, the drive
or array is represented on the left side of the window as a Logical
Storage Unit (LSU). Arrays that make up a multilevel RAID are
displayed as RAID 1 or RAID 5 icons that appear between the LSU
icon on the left and the drives on the right.
Devices are displayed in order of device type, with all non-hard-
drive devices displayed first, followed by all hard drives not
assigned to an array, then hot spares, and finally all arrays by RAID
level.
The tool bar at the top of the Logical Configuration View window
contains the following buttons:
Switch View
Create Array
Group
Expand Array
Group
Delete Array
Group
Print
Switches to the Logical Information View. For more
information, see
Starts the process of collecting available individual
drives to assemble into a RAID array. For more
information, see
Allows adding drives to an existing array and
dynamically resizing the logical drive. For more
information, see
Allows deletion of the selected RAID array. For
more information, see
Prints the configuration file of the selected RAID
array.
page
3-21.
page
3-16.
page
3-21.
page
3-23.
Storage Manager
3-9
Advertisement
Table of Contents
