RAID
Create...
Delete
Rebuild
Stop Build
Action
Make Hotspare
Remove Hotspare
Format Drive
(SCSI only)
Flash HBA
Test Alarm
(SCSI only)
Silence Alarm
(SCSI only)
Make Boot Floppy
Help
About...
Create a new array.
Delete the currently selected array.
Rebuild a RAID 1, 5, 0/1 or 0/5 array.
Stop building or rebuilding an array.
Designate the currently selected drive as a
hot spare.
Make the currently selected hot spare
available for use by the operating system.
Low-level format a currently selected drive.
Note: Do not format a SCSI drive unless
formatting is recommended by the
manufacturer.
Update the firmware, controller BIOS, or
SMOR image in controller ROM.
Test the audible alarm on the controller.
Turn off the audible alarm on the controller.
Make a bootable disk that runs SMOR.
Display version information for SMOR.
Storage Manager on ROM
2-5