Table of Contents
Advertisement
4
As you make your selections, the Chosen Array Parameters
change to indicate which RAID level and stripe size best fit
your selection.
5
You can customize the RAID level and stripe size defaults by
selecting the Override button.
6
Click Continue to select the drives you want to use. The
Logical Configuration View window appears with the caption
Choosing Drives for Array (RAID n), where n is the RAID level
chosen. Select the drives you want to use in the array group as
follows:
a
To add drives
Click each drive to be added. A green check mark
I
indicates that a drive is selected.
Click Include Drive to add the marked drives to the new
I
array group. You may need to scroll the window to view
the array group.
b
To remove drives
Click the drive icons you want to remove and then click
I
Remove Drive.
During the drive selection process some drives might be
displayed in a blue color. This indicates that these drives
cannot be included in the array unless you change the
configuration. You must either select more drives for the array
or remove one or more drives from the array. See
on page 3-12
be included in arrays.
7
When you finish selecting the drives to be included in the new
array group, click Done. The icon for the array group appears
with a black flag until you start the build process by saving
your changes.
for rules regarding the number of drives that can
Storage Manager
Array Groups
3-17
Advertisement
Table of Contents
