Adaptec 750i User Manual page 102

Storage Manager
Windows 95/98/ME
The communication server is installed as a DOS command line
application. To start the communication server, double-click
Start > Storage Manager > Communication Server.
To access the server, you need a password only; a user name is not
required. The initial default password is password. To change the
password, click Start > Storage Manager > Change
Communication Password.
Novell NetWare
Logging in to a NetWare server requires a user name and password.
The user name and password are unique to the communication
module (dptcom.nlm). Logging on through a Storage Manager client
with remote communication does not log on to the NetWare server.
If a you want to receive broadcast messages from the broadcaster
module (dptnwmsg.nlm) you must be logged in to the NetWare
server from a client workstation and your NetWare user name must
be in the dptelog.ini file as user=user_name.
SCO UNIX
A communication server entry is placed into the rc.d files, which
causes it to be started when the system is booted into Multiuser
mode.
During installation, the file dptcom.chk is created in the directory
into which Storage Manager is installed. The ownership of this file is
set to root/dtadmain, and permissions are -rw-rw---(6608).
Access to SCO servers requires both a user name and password.
After determining that the user name and password are valid on the
system on which it is running, the communication server attempts
to open dptcom.chk using the user name.
3-58