Table of Contents
Advertisement
Storage Manager
Figure 3-16. Flash Configuration Window – ATA and SCSI
The current controller model, firmware version, and firmware type
are displayed. To specify an image file for the flash operation, you
can type a path and filename in the Filename field or click Browse to
use a file selection window.
Firmware images are contained in a xxxxxxxx.ima file, where the
8-character file name consists of the 4-digit model number and a
4-digit release number. The controller BIOS image is contained in a
file named i2obios.xxx (where, xxx is the version number). SMOR
updates are contained in a file named smoryyyy.xxx. Where, yyyy is
the version number and the file extension (xxx) is the build number.
You can obtain the latest files by contacting your technical support
representative.
When you select an image file, Storage Manager reads the file to
determine the type of image selected: firmware, controller BIOS, or
SMOR. The Version, Date, and Type fields are displayed in the
corresponding section of the window.
Click OK to begin the flash operation. Click Cancel to return to the
Configure Host Bus Adapter window.
3-30
Advertisement
Table of Contents
