Table of Contents
Advertisement
4
Select Action > Flash HBA. The Source File Browser window
appears, as shown in
-A:
2 100320B.IMA
I 2OBIOS.134
S MOR0031.112
-
#0 2 100S:
5
In the Source File Browser window, select the hard drive that
contains the image files. Press Enter to expand the drive
listing.
6
Highlight the image file you want to use and select Ok to
update the controller flash ROM. After the controller reads the
image, it displays the version number of the component you
selected. Select Yes to confirm. A progress indicator appears
showing of the flash operation.
If the operation does not complete successfully, refer to the
procedures for recovering from an incomplete or failed flash ROM
upgrade in the Troubleshooting section of the Adaptec RAID
Installation Guide.
Figure
Figure 2-19. Source File Browser Window
Storage Manager on ROM
2-19.
Select a source for flash
image using the browser.
Select OK button to start
flash procedure.
Cancel
Ok
2-33
Advertisement
Table of Contents
