Christie CP4315-RGB Installation And Setup Manual page 27

2. Remove the rear cover of the projector by unscrewing the 6 captive screws.
3. Behind the MAIN input circuit breaker, disconnect the MAIN input plug from the top power
supply.
A UPS input plug
B MAIN input plug
4. Remove the protective cap from the UPS input plug.
5. Connect the UPS input plug to the top power supply (A).
6. Place the protective cap from the UPS plug on the MAIN input plug.
7. Reinstall the rear panel of the projector.
8. Reinstall the projector touch panel.
9. Plug in the appropriate UPS power cord to the UPS and then into the UPS input (Input B) on
the projector.
Cinema 4K-RGB Installation and Setup Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102710-08 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Installing and setting up
27