Projector Led Status Indicators - Christie CP4315-RGB Installation And Setup Manual

H

Projector LED status indicators

I LED status indicators
J Connects the projector to 3D devices.
K Connects the projector to ingest devices.
L Connects the projector to input devices with an HDMI connection.
M Connects the projector to external automation or automation devices.
N Connects the projector to the touch panel (VGA-Out and Screen Power).
O Management Ethernet port (10/100/1000 base-T) and connects the projector to USB devices,
including the touch panel screen.
P Two Ethernet ports connecting the projector to network-attached storage (NAS) devices and the
Library Media Server (LMS) network, if applicable. The Media port can also be used for content
transfer.
Projector LED status indicators
Identify the LED state colors and meaning.
LEDs
Green: Flashes once per second
Yellow: Off
Red: Off
Green: Flashes three times per second
Yellow: Off
Red: Off
Green: Solid
Yellow: Off
Red: Off
Green: Solid
Yellow: Flashes once per second
Red: Off
Green: Solid
Yellow: Flashes three times per second
Red: Off
Green: Off
Yellow: Off
Red: Flashes three times per second
Green: Off
Yellow: Off
Red: Solid
Cinema 4K-RGB Installation and Setup Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102710-08 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Connecting devices and establishing communication
Description
Standby mode
Warm up
The power is on, and the lamp is on or off
Notification
Non-critical alarm
Unacknowledged critical error
Acknowledged critical error
34