Removing The Seat; Mounting The Seat; Removing The Activated Carbon Filter; Installing The Activated Carbon Filter - KTM 450 Rally Factory Replica 2021 Owner's Manual

12.18

Removing the seat

12.19

Mounting the seat

12.20

Removing the activated carbon filter

12.21

Installing the activated carbon filter

–
1
Pull on loop
take it off.
A00740-10
–
Position the seat between the two front fuel tanks.
–
Insert locking pin
rear of the seat until the locking pin engages with a click.
–
Check that the seat is correctly mounted.
A00739-10
–
Remove screws
–
Pull off hoses
–
Take out the activated carbon filter.
A00741-10
–
Position the activated carbon filter.
–
Mount and tighten screws
–
Mount the hoses
A00741-10
SERVICE WORK ON THE CHASSIS 12
. At the same time, lift the seat at the rear and
1
into the lock housing and push down the
1
.
2
.
1
.
2
.
67