Riding Instructions 9; Checks And Maintenance When Preparing For Use; Starting - KTM 450 Rally Factory Replica 2021 Owner's Manual

Table of Contents

9.1

Checks and maintenance when preparing for use

Info

Before every trip, check the condition of the vehicle and ensure that it is safe to operate.

The vehicle must be in perfect technical condition when used.

–

Check the engine oil level. (

–

Check the electrical system.

–

Check front brake fluid level. (

–

Check rear brake fluid level. (

–

Check the front brake linings. (

–

Check the rear brake linings. (

–

Check that the brake system is functioning properly.

–

Check the coolant level. (

–

Check the chain for dirt accumulation. (

–

Check the chain, rear sprocket, engine sprocket, and chain guide. (

–

Check chain tension. (

–

Check tire condition. (

–

Check tire pressure. (

p. 106)

–

Check the spoke tension. (

–

Clean the dust boots of the fork legs. (

–

Bleed the fork legs. (

p. 55)

–

Check the air filter.

–

Check the fuel filter.

–

Check the settings of all controls and ensure that they can be operated smoothly.

–

Check all screws, nuts, and hose clamps regularly for tightness.

–

Check the fuel reserves.

9.2

Starting

Danger

Danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and death.

–

Always make sure there is sufficient ventilation when running the engine.

–

Use effective exhaust extraction when starting or running the engine in an enclosed space.

Note

Engine damage High revving speed with a cold engine negatively impacts the lifespan of the engine.

–

Always run the engine warm at a low speed.

p. 121)

p. 91)

p. 96)

p. 92)

p. 98)

p. 114)

p. 77)

p. 78)

p. 105)

p. 107)

p. 56)

–

Take the motorcycle off side stand

stand with rubber strap

–

Shift transmission into neutral.

401944-10