Adjusting The Unit Of Measurement - KTM 450 Rally Factory Replica 2021 Owner's Manual

7.10

Adjusting the unit of measurement

Info
Repeatedly press the button
function is reached.
If no button is pressed for 20 seconds, the settings are
automatically stored.
Briefly press
the button .
Press the but-
ton for 2–3
seconds.
Briefly press
the button .
Press the but-
ton for 2–3
seconds.
Wait 3–5 sec-
onds
Wait 10–12
seconds
Condition
• The motorcycle is stationary.
–
Repeatedly press the button
bottom right of the display.
–
Press the button
–
Repeatedly press the button
In measurement unit mode, you can change the unit of measure-
ment.
400329-01
Info
If no button is pressed for 5 seconds, the settings are auto-
matically stored.
Briefly press
the button .
Press the but-
ton for 2–3
seconds.
Briefly press
the button .
Press the but-
ton for 2–3
seconds.
Wait 3–5 sec-
onds
Wait 10–12
seconds
COMBINATION INSTRUMENT 7
briefly until the desired
Activates the flashing display and changes to
the next display
No function
Deactivates the flashing display and changes to
the next display
No function
Changes to the next display without changes
Setup menu starts, stores the settings, and
changes to H or ODO.
briefly until H appears at the
for 2–3 seconds.
briefly until Km/h/Mph flashes.
Starts selection, activates Km/h display
No function
Activates Mph display
No function
Changes to the next display, changes from
selection to the Setup menu
Stores and closes the Setup menu
27