12.6
Installing the fork protector
12.7
Removing fork legs
–
Position fork protector on the right fork leg. Mount and tighten
1
screws
.
Guideline
Remaining screws,
chassis
–
Position brake line, wiring harness, and clamp. Mount and
tighten screws
–
Position fork protector on left fork leg. Mount and tighten
3
A00456-11
screws
.
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove front wheel.
Main work
–
Remove screws
–
Allow the brake caliper and brake line to hang loosely to the
side.
A00467-10
–
Loosen screws
–
Loosen screws
A00468-10
SERVICE WORK ON THE CHASSIS 12
M6
10 Nm (7.4 lbf ft)
2
.
M6
10 Nm (7.4 lbf ft)
(
p. 101)
1
.
2
. Take out the right fork leg.
3
. Take out the left fork leg.
p. 55)
57