Table of Contents
Advertisement
11.11
Checking the basic setting of the fork
Info
For various reasons, no exact riding sag can be determined for the forks.
11.12
Adjusting the compression damping of the fork
Info
The hydraulic compression damping determines the fork suspension behavior.
11.13
Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
–
As with the shock absorber, small differences in the rider's
weight can be compensated by the spring preload.
–
However, if the fork is often overloaded (hard end stop on com-
pression), harder springs must be fit to avoid damage to the
fork and frame.
401000-01
–
Turn adjusting screws
Info
Adjusting screws
fork legs.
Make the same adjustment on both fork legs.
–
Turn counterclockwise by the number of clicks corresponding
to the fork type.
A00451-10
Guideline
Compression damping
Standard
Info
Turn clockwise to increase damping; turn counterclock-
wise to reduce damping during compression.
TUNING THE CHASSIS 11
1
clockwise all the way.
1
are located at the top end of the
15 clicks
51
Hide quick links:
Advertisement
Table of Contents
