Figure 4-11 Connecting Ground Cable; Figure 4-12 Connecting Ac Power Cable - Raisecom ISCOM2600G (A) Series Product Description

Raisecom
ISCOM2600G (A) Series Product Description
Step 3 Reinstall the screw to the ground terminal, and tighten the screws clockwise, as shown in
Figure 4-11.

Figure 4-11 Connecting ground cable

Connecting AC power cable
Connect the AC power cable as below:
Step 1 Ensure that the ISCOM2600G series switch is well grounded.
Step 2 Insert the C13 connector of the AC power cable into the AC power interface on the rear panel
tightly. Insert the power plug of the AC power cable into the AC power socket of the power
sourcing equipment, as shown in Figure 4-12.

Figure 4-12 Connecting AC power cable

Connecting DC power
Connect the DC power cable as below:
Step 1 Ensure that the ISCOM2600G series switch is well grounded.
Step 2 Open the cover on the power interface. Loosen the screws and then connect the DC power
cable.
Step 3 Fasten the screws and then close the cover, as shown in Figure 4-13.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
4 Device installation
55