Location Of The Dimm Connectors On The - Lenovo ThinkAgile CP Hardware Part Replacement And Component Maintenance Procedures

Install DIMM
Use this information to install a DIMM.
Chapter 3 "Read
the
Installation
Guidelines" on
page 19
Attention: Memory modules are sensitive to static discharge and require special handling. In addition to the
standard guidelines for "Handling static-sensitive devices" on page 21:
• Always wear an electrostatic-discharge strap when removing or installing memory modules. Electrostatic-
discharge gloves can also be used.
• Never hold two or more memory modules together so that they touch. Do not stack memory modules
directly on top of each other during storage.
• Never touch the gold memory module connector contacts or allow these contacts to touch the outside of
the memory-module connector housing.
• Handle memory modules with care: never bend, twist, or drop a memory module.
Procedure performed by: customer or field service
The following illustration shows the location of the DIMM connectors on the system board. The following
illustration shows the location of the DIMM connectors on the system board.
Figure 55. Location of the DIMM connectors on the system board
"Power off
the compute
node" on page
119
.
Chapter 5 Part replacement and maintenance procedures
"ATTENTION:
Static Sensitive Device
Ground package before
opening" on page 21
115