Lenovo ThinkAgile CP Hardware Part Replacement And Component Maintenance Procedures page 110

Remove a 60x60x56 mm Fan
Procedure for removing a 60x60x56 mm fan from the compute enclosure.
Procedure performed by: customer or field service
Complete the following steps to remove a fan:
To remove a 60x60x56 mm fan, follow these steps:
Step 1. Squeeze the fan release latches together.
Step 2. Lift the fan out of the enclosure.
Figure 46. 60x60x56mm fan removal
The removal of the fan is now complete.
After the removal of the fan:
• Install a new fan. See "Install a fan" on page 104
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
102
Lenovo ThinkAgile CP Hardware Part Replacement and Component Maintenance Procedures