Lenovo ThinkAgile CP Hardware Part Replacement And Component Maintenance Procedures page 112

Install a fan
Use this information to install a fan in the compute enclosure.
Chapter 3 "Read
the
Installation
Guidelines" on
page 19
To avoid possible danger, read and follow the following safety statement.
• S017
CAUTION:
Hazardous moving fan blades nearby.
• S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted
with metal, which might result in spattered metal, burns, or both.
Before you install a fan, remove the fan cover (see
the_fan_cover.html ).
Attention:
• Static electricity released into internal solution components when the solution is powered on may cause
the solution to halt, which may result in data loss. To avoid this problem, always use an electrostatic-
discharge wrist strap or other grounding system when you work inside the solution with the power on.
• Replace the failed fan and reinstall the fan cover in three minutes.
104
Lenovo ThinkAgile CP Hardware Part Replacement and Component Maintenance Procedures
"ATTENTION:
Static Sensitive Device
Ground package before
opening" on page 21
http://thinksystem.lenovofiles.com/help/topic/7X21/remove_