2-7. Inside Panel
2-7-1. Inside Panel Assembly
Preparation
1.
Remove the cabinet (BM). (Refer to "2-2. Outside Panel Assembly".)
Procedure
1.
Open the ME lid and the DC lid.
2.
Remove the 10 precision screws.
3.
Release the three hooks, and then remove the inside panel assembly.
Note
Be careful not to break the flexible board.
4.
Disconnect the flexible board from the connector (CN0153) on the AR-5 board.
AR-5 board
5.
Install the removed parts by reversing the steps of removal.
CN0153
Inside panel assembly
Precision
screws
(P2 x 4)
Flexible board
Precision
screws
(P2 x 4)
Precision
screws
(P2 x 4)
ME lid
Precision
screws
(P2 x 4)
Precision screw
(P2 x 4)
DC lid
Hooks
44