4-4-7. Auto FB Adjust Menu
The Auto FB Adjust menu allows to automatically adjust the lens flange back.
Flange Back Adjustment Method
Adjustment Procedure
1.
Set all exposure adjustments to manual mode.
2.
Set the gain to 0 dB and open the iris completely.
3.
Place a high-contrast object at three meters from the front of the camera lens, and then adjust the illumination, camera shutter,
and ND filter so that adequate video output can be obtained.
4.
Execute [Auto FB Adjust].
Tip
Pressing the CANCEL/BACK button during execution of Auto FB Adjust interrupts the Auto FB Adjust processing.
4-4-8. RPN Menu
The RPN menu enables various operations such as manual registration, deletion and automatic detection of the RPN compensation
point.
4-4-9. Service Reset Menu
Executing the Service Reset menu returns all settings of the Service menu to the factory default.
4-4-10. Factory Reset Menu
Executing the Factory Reset menu returns all settings of the unit to the factory default.
4-4-11. Information Menu
The Information menu displays information and status of the unit.
Overview of Information Menu
Serial Number
This menu displays the serial number of the unit.
Main Board Temperature
This menu displays the temperature of the main board.
Log Dump
This menu acquires error log data and stores it in an active writable medium.
4-4-12. Version Menu
The Version menu is used to check the firmware versions of the unit.
76