Handle; Handle Assembly - Sony PXW-Z190V Service Manual

2-8. Handle

2-8-1. Handle Assembly

Preparation
1. Remove the outside panel assembly. (Refer to "2-2. Outside Panel Assembly".)
2. Remove the CT-287A board. (Refer to "2-3. CT-287A Board".)
3. Remove the jack assembly. (Refer to "2-4. VC-41 board".)
4. Remove the inside panel assembly. (Refer to "2-7-1. Inside Panel Assembly".)
Procedure
1. Remove the six precision screws, and then remove the BT panel assembly.
Precision screws
(P2 x 4)
2. Disconnect the flexible board from the connector (CN0151) on the AR-5 board.
3. Disconnect the flexible flat cable from the connector (CN0152) on the AR-5 board.
Flexible board
CN0151
BT panel assembly
Precision screws
(P2 x 4)
Flexible flat cable
CN0152
AR-5 board
48