2-7-3. KSW-71 Board
Preparation
1.
Remove the inside panel assembly. (Refer to "2-7-1. Inside Panel Assembly".)
Procedure
1.
Remove the four precision screws, and then remove the AU lid lock claw.
2.
Disconnect the four flexible flat cables from the four connectors (CN0106, CN0107, CN0109, CN0110) on the KSW-71 board.
AU lid lock claw
Precision screws
(TP2 x 5)
CN0109
CN0106
CN0107
Flexible flat cables
Flexible flat cable
CN0110
Flexible flat cable
KSW-71 board
Inside panel assembly
KSW-71 board
46