Disconnecting/Connecting Fine-Wire Coaxial Cable - Sony PXW-Z190V Service Manual
Solid-state memory camcorder
Hide thumbs
Also See for PXW-Z190V:
- Operating instructions manual (120 pages) ,
- Operating instructions manual (170 pages) ,
- Operating instructions manual (160 pages)
Table of Contents
Advertisement
1-11-2. Disconnecting/Connecting Fine-Wire Coaxial Cable
Note
•
Be very careful when handling the fine-wire coaxial cable so that fine wires are not disconnected.
•
When disconnecting the fine-wire coaxial cable, be sure to hold the connector. Do not attempt to pull the cable.
•
Check that the contact surface of the fine-wire coaxial cable connector is not contaminated.
Type A
Disconnecting
1.
Hold both sides of the fine-wire coaxial cable connector, and pull the connector straight to disconnect it.
Connecting
1.
Insert the connector straight matching the polarity marks.
Note
Inserting the connector at an angle so may damage it.
Insert the connector firmly as far as it will go.
Polarity marks
Connector
Angle type
Correct
Fine-wire coaxial cable
Wrong
Hold the connector to disconnect.
Do not attempt to disconnect by
pulling the cable.
19
Advertisement
Table of Contents
