Circuit Protection Parts; Replacing Fuses; Electrical Adjustment - Sony PXW-Z190V Service Manual

Solid-state memory camcorder
Table of Contents

Advertisement

1-9. Circuit Protection Parts

1-9-1. Replacing Fuses

w
Fuses are essential parts for safe operation. Be sure to use the parts specified in this manual. Replacing a fuse with an unspecified one
may cause fire or electric shock.
The unit is equipped with fuses. The fuses blow if overcurrent flows in the unit due to an abnormality. In that case, turn off the main
power of the unit once, inspect inside of the unit, and then remove the cause of the overcurrent. After that, replace the defective parts.
Board Name
Ref. No.
DD-53
F0100
IF-1346
F9001
LD-136
F9700
VC-41
F4200
F4300
F4301
F0100
DD-53 Board/Side A
F4300
F4301
VC-41 Board/Side A

1-10. Electrical Adjustment

For adjusting this unit, the Adjust Station and the Adjust Manual are required.
Adjust Station
It is the software to start up Adjust Manual for each model.
For details, refer to Installation manual supplied with the installer for the Adjust Station.
Adjust Manual
It is the software to adjust and check digital cameras and camcorders for service.
For details, refer to Installation manual supplied with the installer for the Adjust Manual.
Note
Be sure to install Adjust Station first.
Part No.
1-523-395-11
!
!
1-576-646-31
1-576-286-31
!
!
1-523-209-11
1-523-408-11
1-523-408-11
F9001
IF-1346 Board/Side B
F4200
Rating
0.5 A/50 A
1.0 A/50 V
1.4 A/50 V
0.25 A/32 V
1.25 A/32 V
1.25 A/32 V
F9700
LD-136 Board/Side A
VC-41 Board/Side B
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pxw-z190t

Table of Contents